Eurol ATF 7400 is a fully synthetic low viscosity automatic transmission oil with multi-vehicle applicability, specially tailored to meet the demands of the Mercedes Benz 9-speed NAG3 automatic transmission. Eurol ATF 7400 is formulated with high quality synthetic base oils to meet many European and Asian OEM specs, ensuring wide applicability. Eurol ATF 7400 offers a significant reduction of fuel consumption and CO2 emission due to tailored additives. Eurol ATF 7400 provides wear protection across the entire drain interval, keeping the transmission performing at its best. Eurol ATF 7400 offers excellent resistance against oxidation, corrosion and foam formation, resulting in a constant high performance during its lifetime.

Eurol BlueStar Grease EP 2 has been developed to meet the ongoing technical progress and demands in both the transport sector, as well as in the industrial sector for application in bearings and chassis components. Eurol BlueStar Grease EP 2 is used in ball, roller, wheel and plain bearings operating under high (shock) loads or vibrations at both high (temporary up to 200 °C.) as well as low temperatures, while keeping its consistency. Eurol BlueStar Grease EP 2 has an excellent temperature stability and a good adherence capability. In actual practice, it has been proved to be an excellent grease for wheel bearings and hubs of trailers and caravans. Besides, Eurol BlueStar Grease EP 2 characterizes itself by good corrosion protection properties (also in the presence of water), excellent wear protection and resistance against water wash-out, resulting in a very long life-time. The grease has a good pumpability over a wide temperature range and offers an excellent oxidation stability. Chemical reaction with sealings will not occur.

EUROL CARWASH hand applied wax, containing car shampoo is a highly concentrated, synthetic shampoo. It is safe to use on lacquer, rubber, plastic and chrome of cars, motorcycles and boats. Eurol Carwash is excellent for hand applied applications, as well as for car wash and high pressure cleaners. Due to the strong cleaning capability, even very dirty surfaces get a beautiful shine with Eurol Carwash, without the need for a chamois after-treatment. Eurol Carwash is economical in use, the mixing ratio is between 1:50 and 1:100, depending on the degree of pollution. Rinse with water, cleaned surfaces should not dry in bright sunlight.

Eurol Chain Lube Spray Cross  is a chain spray with Triple-Tech additive technology, especially developed for chains operating in dusty conditions. Eurol Chain Lube Spray Cross & Off Road has a high protection against wear, providing a long and durable protection of the sprockets and the chain. Eurol Chain Lube Spray Cross & Off Road has an excellent penetrating ability, ensuring that the pins in the chain, as well as the bushings, receive proper lubrication, allowing for a supple chain, even after being subjected to dust and dirt. To be able to offer the performance of the Eurol Chain Lube Spray Cross & Off Road over a longer period of time, the spray has an excellent adherence to the chain. This allows the spray to stay in place, regardless of the weather. The Eurol Chain Lube Spray Cross & Off Road provides a protective coating to the outside of the chain, whilst the inside of the chain is lubricated through the use of creeping additives. By applying a coating to the outside of the chain, the chain spray offers corrosion protection, keeping the chain free from rust. Eurol Chain Lube Spray Cross & Off Road is available in a sturdy 400 ml aerosol can for easy application. To apply the product, clean the chain, apply a thin film of Eurol Chain Lube Spray Cross & Off Road to the chain and leave to work for 30 minutes. Remove any excess material with a dry cloth.

Eurol Chain Lube Spray Cross is a high-performance chain spray with Triple-Tech additive technology, specially formulated for chains operating in dusty conditions. It provides excellent protection against wear, ensuring long-lasting durability for both the sprockets and the chain. With its superior penetrating ability, it effectively lubricates the pins and bushings, keeping the chain supple even in dusty and dirty environments. This spray has exceptional adherence, allowing it to stay in place regardless of the weather. It offers a protective coating to prevent corrosion and rust, while also lubricating the inside of the chain. Available in a convenient 400 ml aerosol can, Eurol Chain Lube Spray Cross & Off Road is easy to apply. Simply clean the chain, apply a thin film, and let it work for 30 minutes before wiping off any excess. Perfect for off-road and cross-country biking.

Eurol Chain Lube Spray Road & Racing is a chain spray with Triple-Tech additive technology, especially developed for chains rotating at high revolutions. Eurol Chain Lube Spray Road & Racing has a high resistance to fling-off, providing a long and durable lubrication of the chain. Eurol Chain Lube Spray Road & Racing has an excellent penetrating ability, ensuring that the pins in the chain, as well as the bushings, receive proper lubrication, allowing for a supple chain, even after being subjected to high loads. To be able to offer the performance of the Eurol Chain Lube Spray Road & Racing over a longer period of time, the spray has an excellent adherence to the chain. This allows the spray to stay in place, regardless of the weather. The Eurol Chain Lube Spray Road & Racing provides a protective coating to the outside of the chain, whilst the inside of the chain is lubricated through the use of creeping additives. By applying a coating to the outside of the chain, the chain spray offers corrosion protection, keeping the chain free from rust. Eurol Chain Lube Spray Road & Racing is available in a sturdy 400 ml aerosol can for easy application. To apply the product, clean the chain, apply a thin film of Eurol Chain Lube Spray Road & Racing to the chain and leave to work for 30 minutes. Remove any excess material with a dry cloth.