Eurol MTF 75W-80 GL5 is a synthetic gear oil, which can be used in final drives and manual transmissions (where GL-5 quality is required). Eurol MTF 75W-80 GL5 is very well compatible with synchromesh and ensures very smooth shifting even at low temperatures. Eurol MTF 75W-80 GL5 has an excellent high load carrying capacity for an excellent absorption of sudden peak loads. The viscosity decrease due to heavy loads is only slightly, which will extend oil drain intervals (and in some cases lifetime filling) and ensures proper viscosity. Eurol MTF 75W-80 GL5 contains special friction modifiers, which ensure sustainable fuel saving and less heat development. Eurol MTF 75W-80 GL5 ensures adequate lubrication at both very low, as very high temperatures and protects against corrosion, wear, thickening and deposits. Eurol MTF 75W-80 GL5 is compatible with most elastomers and seal materials and does not foam under extreme loads.

Eurol Penetrating Oil Spray is a high quality, effective aid for loosening rusted parts. Eurol Penetrating Oil Spray has, besides good penetrating properties, a corrosion resistant properties. Eurol Penetrating Oil Spray contains graphite and molydenum disulfide (MoS2) which ensures long lasting lubrication. Eurol Penetrating Oil Spray can be used at applications suchs as: -Hinges and locks -Screw connections -Gears -Mountings (screws, bolts and nuts) -Tools Eurol Penetrating Oil Spray must be shaked well before use. Spray at approx. 20-25 cm from the object. Apply the desired quantity. The Product has to act for 5 to 10 minutes. Use Eurol Penetrating Oil Spray only in well ventilated areas. In case of eye contact immediately rinse eyes with plenty of water. Flammable substance. Eurol Penetrating Oil Spray has a shelf life of 3 years in an unopened.

EUROL Penetrating Oil Spray, lubricant, rust loosener, penetrating properties, corrosion resistant, graphite, molydenum disulfide, long lasting lubrication, hinges, locks, screw connections, gears, mountings, tools, shake well before use, well ventilated areas, eye contact rinse with water, flammable substance, shelf life 3 years, cool and dry storage. container in a cool and dry place with a temperature range between +5°C and +25°C.

Eurol Powersteering Fluid C is a full synthetic hydraulic fluid, especially developed for hydraulic systems like levelling systems and power steering systems in tractors, passenger cars and commercial vehicles. Eurol Powersteering Fluid C has a very high viscosity index and a very low pour point. Due to these features, the viscosity will hardly change under varying temperatures. Eurol Powersteering Fluid C protects the system against oxidation. Because of the high boiling point and the water resistance, the product can be applied for a long lasting and safe use when this type of fluid is prescribed.