Inground Small Scissor Car Lift

Description

Product introduction: Inground Small Scissor Car Lift 3500kg

The Inground Small Scissor Car Lift model number of this 510MM tabletop 3.5-ton German standard scissors is: DG-2-35J-T. This lift is produced according to strict German inspection standard parameters and is manufactured with a people-oriented and safety-first design concept. Compared with the current similar lifts, this product is a safety level higher than the same type of lifts in terms of the selection of manufacturing materials, lifting weight, and manufacturing quality.

The advantage of Inground Small Scissor Car Lift is that this type does not have racks and does not prevent the driver from getting out of the car, takes up little space in the repair area and does not require foundation preparation for installing the lift, as is necessary for rack-mount mechanisms.

Inground Small Scissor Car Lift takes up significantly less space: it is only 3 meters wide, which saves 25% of space. It is low, while a 2-post lift requires a ceiling height of at least 2.8 meters.

Reliability.

When lifting a car using a scissor lift in a service station, the body experiences the same load as if the car were standing on a flat surface. Unlike two-post foot lifts, which create stress points on the body as the machine is lifted, which in some cases can negatively affect the geometry of the car body and frame, scissor lifts distribute pressure evenly.

Safety.

Inground Small Scissor Car Lift provides much greater safety for personnel and the vehicle - it is almost impossible to drop a car from the ramps of such a lift. Besides, Without exception, all scissor lifts for service stations and auto repair shops are equipped with “parachute” valves, which prevent the rapid leakage of oil from the system in the event of destruction of the hydraulic system. Blocking valves are automatically activated in the event of a sudden loss of pressure due to a broken hose or a damaged gasket.

In the raised position, the lift can be locked mechanically with a special lever. This not only increases safety during operation, but also saves on electricity. Special valves block the outflow of fluid from the cylinders if electricity stops flowing into the hydraulic scissor lift for garages and car service centers.